Material introduction upstream of the finisher

Downstream of the MRS extrusion process, ethylene glycol is introduced into the melt flow and mixed with it. In this way, differing viscosities in the input material can be equalized. The glycolised melt is then be filtered in the Rotary Melt Filtration System RSFgenius. Thanks to the low viscosity, fine filtration with a relatively small filtration system is possible. The purified polymer flows then through the Online Viscometer, which controls the quantity of ethylene glycol which is injected into the melt and in this way maintains a constant viscosity. With the help of a booster pump, the polymer is fed into the main polymer flow upstream of the finisher. With a static mixer, the reprocessed, glycolysed material is mixed with the main material flow and the blend of recycled and virgin material passes into the finisher where the polycondensation takes place under vacuum and the PET melt passes on to the spinning beam from there.

waste_to_fiber_en